Fujikura 90S+
-
True Core-to-Core alignment splicer with the high precision lens for an accurate result
-
Advanced Image processing technology analyses the image as brightness pattern, find true core position, and achieve consistent lowe splice loss.
-
Fiber discrimination automatically identifies optimum arc discharge parameters
-
Faster automated feature in 88S reduce installation time and the operator can complete the entire splicing without touching the machine by moving the fiber
-
The fiber retention clamps gently hold the fiber to keep it from flying out.
-
88S and cleaver CT50 are enabled with wireless data connectivity for Automatic cleaver blade rotation
-
88S can display cleaver blade height change, position change, remaining blade
KEY FEATURES
​
Standard Package:​
-
Fusion splicer 90S+
-
AC adapter
-
AC power cord
-
Carrying case
-
Spare electrodes ELCT2-20A
-
Instruction manual CD
-
Quick reference guide
-
Alcohol pot
-
USB cable
-
Screwdriver
-
Fiber holder set Plate
-
Fiber optic cleaver CT50
OVERVIEW
-
Applicable fibers : Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
-
Cladding dia./ Sheath dia.: 80-150μm / 100- 3000um
-
Cleave length: 5mm to 16mm with sheath clamp
-
Splice mode / heating mode : Total 100 splice modes / 30 heating modes
-
Typical splice loss : 0.02dB (SM), 0.01dB(MM), 0.04dB(DS) and 0.04dB(NZDS)
-
Splice time :Typical 7sec
-
Sleeve heating time : Typical 9sec
-
Electrode life : 5000 splices
-
Weight - 2.8 Kg
-
Viewing methods / magnification :5” color LCD. 320X magnification
-
No. of splice / heating per battery full charge : Typical 300 cycles
-
Splice / heat mode: 100/30 mode
-
Splice result storage: 20,000 splices
-
Splice image storage : 100 images
-
Operating condition : Altitude : 0 to 5,000m above sea level, Wind : 15m/sec, Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-condensing
-
Automatic features: Splice mode selection, Discharge calibration, wind protector, sheath clamp, Heater id, Heater clamp